's Instant Pool Water Conditioner is used for stabilizing chlorine from UV sunlight loss. It begins working to protect chlorine the instant it is added to the pool. Regular cyanuric acid with a pH of 2.8 is very acidic and it takes from 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system, depending on the method of application. 's Instant Pool Water Conditioner is not an acid (it's a salt) and has a pool friendly pH, so it will not damage pool surfaces or equipment.SHAKE WELL!With circulation pump running, pour Instant Pool Water Conditioner into pool skimmer slowly OR pour directly into pool water, while walking around perimeter of pool. Brush to speed absorption.Rinse container with pool water and shake to ensure all product is removed from the bottom of the bottle.Pour remaining rinse solution into skimmer or pool.Maintenance: 1. Measure CYA level in pool using cyanuric acid test or have it tested by a professional pool products supplier. 2. If CYA level is less than 30ppm, calculate the gallons ofInstant Pool Water Conditioner needed using the following formula: 4oz added to 10,000 gallons OR 2oz added to 5,000 gallons = 1ppm increase of conditioner stabilizer level.Note: 1 gallon of Instant Pool Water Conditioner raises conditioner (stabilizer) level in 10,000 gallons by 32ppm. 1/2 gallon of Instant Pool Water Conditioner raises conditioner (stabilizer) level in 5,000 gallons by 32ppm.

• 's Instant Pool Water Conditioner is used for stabilizing pool water. Chlorine will last many times longer in pool water properly stabilized with Instant Pool Water Conditioner. Liquid stabilizer works in all pools and will not damage pool surfaces.Features:
• Works in all pools
• Protects chlorine from sunlight instantly
• Pool friendly – It's a salt not an acid
• Will not damage pool surfaces or equipment
• New easy pour formula
• Fast acting liquid formula starts to work immediately
• 1 gallon container
• Directions: One gallon adds 35 pm pool conditioner per 10,000 gallons of pool water
• Ideal stabilizer range should approximately 35 ppm